To connect your Viking Chiller to the Nordic Flow App, follow these steps:

DOWNLOAD FULL MANUAL HERE

• DOWNLOADING THE APP

  • Step 1: Make sure your smartphone is connected to a 2.4 GHz Wi-Fi
    network and that Bluetooth is enabled. Ensure both your smartphone and the chiller are within the same Wi-Fi coverage area. Note that the chiller is not compatible with 5 GHz Wi-Fi networks. 
  • Step 2: Download the "Nordic Flow: Breathwork" app by searching
    for the app in the App Store & Google Play Store.
  • Step 3: Install the app on your smartphone and register an account.
    
    
• CHILLER INTERFACE
  • Step 4:Press and hold the UP and DOWN arrow buttons to
    unlock or lock the controls.
  • Step 5: Press and hold the "SET" button on the chiller for 6 seconds
    until you hear a beep. If the connection has been successfully
    established, the Wifi  icon shown in the image will start flashing.
    
    
• CHILLER MOBILE APP
  • Step 6:Open the Nordic FLOW app on your iOS or Android device. Ensure
    your Bluetooth is enabled. 
  • Step 7: Select the person icon (my account) on the bottom right of the screen.
  • Step 8: Select settings button on the top left.
  • Step 9: Scroll down to “My Chiller” under Nordic Wave
  • Step 10: Click "add device"
  • Step 11: Enter Wi-Fi Info and wait for device to pair.
  • Step 12: Once the setup is complete, you should be able to control the chiller
    remotely.